Teka Appliance Repair in Northgate & West Green

What does the Err1 error mean on a Teka washing machine?

The Err1 error on Teka washing machines indicates that the door is not properly shut or the door lock is not engaging. Open and firmly close the door until you hear it click. Ensure no clothing is trapped in the door seal. If the error persists, the door lock mechanism may be faulty and require replacement by a technician.

What does the C91 error mean on a Teka induction hob?

The C91 error on Teka induction hobs indicates that the Stop&Go (pause) sensor is obstructed. Remove any objects from the control area. Clean and dry the touch control surface. Press the Stop&Go button twice to clear the error and return to normal operation.

What does the Err5 error mean on a Teka washing machine?

The Err5 error on Teka washing machines indicates a water level error where the required level has not been reached within 8 minutes. Ensure the water tap is fully open and has adequate pressure. Check that the drain hose is installed at the correct height (80-100 cm) and is not submerged in water. If problems persist, contact a specialist technician.

What does the E4 error mean on a Teka induction hob?

The E4 error on Teka induction hobs indicates a communication failure between the user interface and the induction heating element. Switch off the hob at the mains and wait 10 minutes before switching it back on. If the error persists, contact a specialist technician as the control board or wiring may need inspection.

What does the U400 error mean on a Teka induction hob?

The U400 error on Teka induction hobs indicates an incorrect electrical connection where the hob has been connected to an inappropriate power supply. Do not use the hob. Contact a qualified electrician to verify the electrical installation meets the manufacturer's requirements. This error cannot be cleared until the connection is corrected.

How should I clean my Teka induction hob?

After each use, wipe the glass surface with a damp cloth and mild detergent to remove spills. Keep the control panel clean and dry at all times. Allow the hob to cool before cleaning.

How should I maintain my Teka dishwasher?

Clean the outer surfaces and door lining regularly using a soft cloth moistened with water or mild detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. After every wash, turn off the water supply and leave the door slightly open to prevent moisture and odours from being trapped inside.

How do I reset my Teka induction hob after a power cut?

Disconnect the hob from power by switching off at the mains or unplugging it. Wait at least 10 minutes to allow the system to reset, then reconnect and attempt to turn it on again.

My Teka oven door is locked and won't open. How do I unlock it?

The oven door typically locks during pyrolytic cleaning and remains locked until the oven cools to a safe temperature. If the door stays locked after cooling, try disconnecting the oven from the power supply for 5-10 minutes, then reconnect it. The door may have locked due to accidental cancellation of the pyrolysis cycle before completion. If the problem persists, consult your user manual or contact a specialist technician.

Why won't my Teka washing machine start?

In many cases, the door has not closed properly. Open and close the door firmly, ensuring you hear the latch click, then try again.