Teka Appliance Repair in Bewbush & North Broadfield

What does the E5 error mean on a Teka dishwasher?

The E5 error on Teka dishwashers indicates a water intake malfunction where the appliance does not take in water correctly. Verify the water tap is open. Check the water intake hose for kinks or blockages. Inspect the inlet filter for debris. If the problem persists after these checks, contact a specialist technician.

What does the C81 error mean on a Teka induction hob?

The C81 error on Teka induction hobs indicates excessive temperature in the electronics or on the glass surface. The hob will switch off automatically as a safety measure. Allow the hob to cool down completely before attempting to use it again. Ensure adequate ventilation around and underneath the hob. If the error recurs frequently, contact a specialist technician to check the installation.

What does the E1 error mean on a Teka refrigerator?

The E1 error on Teka refrigerators indicates a defrost sensor failure. This sensor monitors the defrost cycle to prevent ice build-up on the evaporator. Contact a specialist technician as this is an internal component fault. Continued use may result in frost accumulation affecting cooling efficiency.

What does the E0 error mean on a Teka refrigerator?

The E0 error on Teka refrigerators indicates a problem with the freezer compartment temperature sensor. This sensor monitors the temperature inside the freezer section. Contact a specialist technician as the sensor may need testing and replacement. The refrigerator may continue to operate but temperature control in the freezer may be affected.

What does the C91 error mean on a Teka induction hob?

The C91 error on Teka induction hobs indicates that the Stop&Go (pause) sensor is obstructed. Remove any objects from the control area. Clean and dry the touch control surface. Press the Stop&Go button twice to clear the error and return to normal operation.

How should I maintain my Teka refrigerator?

Clean surfaces that contact food regularly, along with accessible drainage systems. The rubber door seals should be cleaned regularly to prevent bacteria and mould growth, as they are warmer than the interior.

Why is my Teka washing machine vibrating excessively?

Excessive vibration is often caused by the machine not being level. Adjust the feet to ensure the machine is perfectly level. The problem can also be caused by overloading the drum.

What type of cookware can I use on my Teka induction hob?

Only cookware with a magnetic-steel base will work on an induction hob. Cast iron pans and most stainless steel pots are suitable. Aluminium and ceramic cookware will not work.

Why does my Teka gas hob flame go out at the minimum setting?

If the flame goes out at the minimum setting, the flame height may not have been adjusted correctly during installation. This adjustment is part of the installation process and involves setting the gas flow for each burner according to your gas pressure. When the flame height is not set correctly, the flame failure safety device will not detect the flame and will cut off the gas as a safety precaution. Contact a qualified gas engineer to adjust the flame heights.

What does the filter saturation indicator mean on my Teka cooker hood?

When the saturation indicator illuminates, it means the filters need cleaning. After cleaning, press and hold the designated buttons (typically "+" and "-" or "Timer" and "Light") for at least 3 seconds to reset the indicator.