AEG Appliance Repair in Pound Hill North & Forge Wood

What does error code E10 mean on an AEG fridge freezer?

Error code E10 on an AEG fridge freezer indicates the fridge compartment is not cold enough, often after a power failure or placing warm food inside. Set the fridge to a colder temperature or activate Super Cool, and keep doors closed. The error should clear once the correct temperature is reached. If it persists, contact a qualified technician.

What does an F-prefix error code mean on an AEG oven?

F-prefix error codes on an AEG oven (such as F113, F908) indicate various internal faults requiring professional diagnosis. Switch off at the mains for 30 seconds then switch back on. If the error persists, note the specific code and contact a qualified technician.

What does error code E6 or E641 mean on an AEG hob?

Error codes E6 or E641 on an AEG hob indicate insufficient power - the hob is connected to only one phase. This often occurs with incorrect installation. Have a qualified electrician check the connection meets the requirements in the installation instructions.

What does error code CE or CF mean on an AEG tumble dryer?

Error codes CE or CF on an AEG tumble dryer indicate an electronics problem with the control board. Do not use the appliance until the problem is resolved. Unplug the dryer and contact a qualified technician to arrange a repair visit.

What does error code E09 mean on an AEG fridge freezer?

Error code E09 on an AEG fridge freezer indicates the freezer compartment is not cold enough, often after a power failure. Set the freezer to a colder temperature or activate Super Freeze, and keep doors closed. The error should clear once the correct temperature is reached. If it persists, contact a qualified technician.

How do I clean and maintain my AEG dishwasher?

Check and clean the filters and sump after each use. Clean the spray arms regularly to prevent the holes from clogging. Do not use abrasive products, scouring pads, sharp tools, or strong chemicals.

How do I defrost my AEG freezer?

If your freezer requires manual defrosting, remove all food and store in cool bags. Switch off and unplug the appliance. Leave the door open and place towels beneath to catch water. Never use sharp objects to remove ice as this can damage the cooling system. Allow ice to melt naturally or use bowls of warm water to speed the process.

Where can I find the model and serial number on my AEG appliance?

The rating plate with model (PNC) and serial number is typically located: on washing machines and dryers, inside the door frame; on dishwashers, inside the door edge; on fridges and freezers, inside on the left wall; on ovens, behind the door on the frame; on hobs, on the underside. You will need these numbers when ordering spare parts or booking repairs.

How do I use the steam cleaning function on my AEG oven?

Completely cool down the oven first. Fill the water drawer with approximately 950ml of water and select the steam cleaning function. Standard steam cleaning takes about 30 minutes; Steam Cleaning Plus lasts 75 minutes. After the cycle completes, open the door carefully and keep face and hands away to avoid steam burns.

What does No Frost technology mean on my AEG fridge freezer?

No Frost technology circulates cold air throughout the freezer compartment to prevent ice build-up. This means you never need to manually defrost the freezer. Food is frozen more evenly, and you gain more usable storage space without ice accumulation on walls or shelves.