AEG Appliance Repair in Ifield

What does error code C3 mean on an AEG oven?

Error code C3 on an AEG oven indicates the oven door was open when attempting to start pyrolytic cleaning. Ensure the oven door is fully closed before activating the pyrolytic function. The oven will not start the cleaning cycle until the door is properly secured.

What does error code E4 mean on an AEG hob?

Error codes E4 or E4xx on an AEG hob indicate the overheating protection has activated. Switch off the hob immediately. Do not touch the cooking surface - allow it to cool completely until the residual heat indicator is off before handling any cookware. Ensure your cookware is induction-compatible with a flat base. If the error persists after cooling, contact a qualified technician.

What does error code E70 mean on an AEG tumble dryer?

Error code E70 on an AEG tumble dryer indicates a temperature sensor fault. WARNING: This is a safety-critical issue. Do not use or attempt to restart the dryer until the problem has been professionally diagnosed. Unplug the appliance immediately and contact a qualified technician.

What does error code E50 mean on an AEG tumble dryer?

Error code E50 on an AEG tumble dryer indicates a motor or software problem. Unplug the dryer for 30 seconds, then plug it back in and select a programme. If the error reappears, contact a qualified technician.

What does error code i10, i11, AL5 or C1 mean on an AEG dishwasher?

Error codes i10, i11, AL5 or C1 on an AEG dishwasher indicate a water inlet problem - the dishwasher is not receiving water. Switch off the appliance before any inspection. Check the water tap is fully open, inspect the inlet hose for kinks, and clean the filter. If the problem persists, contact a qualified technician.

How do I clean and maintain my AEG dishwasher?

Check and clean the filters and sump after each use. Clean the spray arms regularly to prevent the holes from clogging. Do not use abrasive products, scouring pads, sharp tools, or strong chemicals.

How do I clean the spray arms on my AEG dishwasher?

Ensure any wash cycle has completed and allow the dishwasher to cool if recently used. Remove the spray arms by unscrewing or unclipping them according to your model. Rinse under running water and use a cocktail stick or thin wire to clear any blocked holes. Check for debris in the spray arm connections. Reattach securely and ensure they spin freely before running the next cycle.

When should I clean or replace the carbon filter on my AEG cooker hood?

For hoods in recirculation mode, clean or replace carbon filters after approximately 160 hours of usage, or every 4-6 months. When the hood displays the letter 'C', it's time for maintenance.

How do I use the AEG ProSteam function on my washer dryer?

The ProSteam function uses steam to reduce creases and refresh garments. Select ProSteam as a standalone cycle for lightly worn clothes that need freshening, or add it to a wash programme to reduce ironing time. ProSteam is gentle on fabrics and helps reduce allergens.

How do I clean the inside of my AEG tumble dryer drum?

Clean the inside of your tumble dryer every two to three months. Allow the dryer to cool completely if it has been used recently. Unplug the dryer, open the door, and clean the drum and drum lifters with a damp towel and neutral soap.