AEG Appliance Repair in Langley Green & Tushmore

What does error code C2 mean on an AEG oven?

Error code C2 on an AEG oven indicates the food temperature probe is still connected while attempting pyrolytic cleaning. Disconnect the food sensor from its user-accessible socket (located at the top right inside the oven cavity) before running the pyrolytic function.

What does error code C4 mean on an AEG oven?

Error code C4 on an AEG oven indicates the Plus Steam or Steam Bake function is still activated while attempting pyrolytic cleaning. Press the Steam Bake button to deactivate it (the indicator light will turn off) before starting the pyrolytic function.

What does error code E90, E91, E92, E93 or E94 mean on an AEG washing machine?

Error codes E90 to E94 on an AEG washing machine indicate a configuration or electronics communication error. Switch off at the mains for 30 seconds then switch back on. If the error persists, contact a qualified technician as the electronic control board may require professional diagnosis.

What does error code E08 mean on an AEG fridge freezer?

Error code E08 on an AEG fridge freezer indicates a low voltage warning - the power supply has dropped below 170V. This is a protective warning to prevent compressor damage. Check your home's electrical supply is stable. If the warning persists, contact a qualified electrician.

What does error code E8 or E822 mean on an AEG hob?

Error codes E8 or E822 on an AEG hob indicate incorrect installation or a communication error between electronics. Check the hob is correctly connected according to the installation instructions. Disconnect from mains for 30 seconds then reconnect. If the error persists, contact a qualified technician.

How do I clean and maintain my AEG dishwasher?

Check and clean the filters and sump after each use. Clean the spray arms regularly to prevent the holes from clogging. Do not use abrasive products, scouring pads, sharp tools, or strong chemicals.

What is the difference between washing and drying capacity on my AEG washer dryer?

AEG washer dryers typically have a larger washing capacity than drying capacity. For example, a machine rated at 9kg washing capacity may have only 6kg drying capacity. To achieve optimal drying results, either wash a smaller load or remove some items before starting the drying cycle.

When should I clean or replace the carbon filter on my AEG cooker hood?

For hoods in recirculation mode, clean or replace carbon filters after approximately 160 hours of usage, or every 4-6 months. When the hood displays the letter 'C', it's time for maintenance.

How do I reset my AEG appliance after a power cut?

After a power cut, most AEG appliances will display a blinking clock or error indicator. For cooking appliances, reset the time using the control panel. For washing machines and dishwashers, any interrupted programme will need to be restarted. Check fridges and freezers for food safety if the power was off for an extended period.

How do I clean the spray arms on my AEG dishwasher?

Ensure any wash cycle has completed and allow the dishwasher to cool if recently used. Remove the spray arms by unscrewing or unclipping them according to your model. Rinse under running water and use a cocktail stick or thin wire to clear any blocked holes. Check for debris in the spray arm connections. Reattach securely and ensure they spin freely before running the next cycle.