Beko Appliance Repair in Three Bridges

What does error code E3 mean on a Beko washing machine?

Error code E3 on a Beko washing machine means the heater is not switching off, indicating a control board relay fault. Switch off the machine immediately and unplug it from the mains. Do not use the machine again until it has been professionally repaired. Contact a qualified technician as this fault requires professional repair.

What does error code E3 mean on a Beko fridge freezer?

Error code E3 on a Beko fridge freezer indicates a fridge compartment temperature sensor fault. Switch off the appliance and unplug it from the mains. The fridge temperature display may be inaccurate. Contact a qualified technician for professional inspection.

What does error code E11 mean on a Beko washing machine?

Error code E11 on a Beko washing machine indicates a motor error. Switch off the machine and unplug it from the mains. Do not attempt to use the machine until it has been inspected. Contact a qualified technician as motor faults require professional diagnosis and repair.

What does error code Er 12 mean on a Beko tumble dryer?

Error code Er 12 on a Beko tumble dryer indicates a rotary control error. The programme selector may not be functioning correctly. Switch off the dryer and unplug it from the mains. Wait a few minutes, then reconnect and try again. If the problem persists, contact a qualified technician.

What does error code H4 mean on a Beko dishwasher?

Error code H4 on a Beko dishwasher indicates a temperature sensor (NTC) error. Switch off the dishwasher and unplug it from the mains. The dishwasher cannot accurately measure water temperature. Contact a qualified technician as this fault requires professional diagnosis.

How do I reset my Beko dishwasher?

To reset your dishwasher, press and hold the start or on/off button for 3-5 seconds until the display clears or the lights reset. If this does not work, switch off the appliance at the mains, wait 2-3 minutes, then switch it back on. This clears most temporary errors and allows you to select a new programme.

Why is my Beko dishwasher not cleaning properly?

Check the filter is clean, as a blocked filter significantly reduces cleaning efficiency. Also check the spray arms for blockages and ensure you have selected a wash cycle with a suitable temperature. Water below 65°C cannot effectively remove germs or dissolve food residue.

How often should I replace the charcoal filter on my Beko cooker hood?

Non-washable charcoal filters should be replaced at least every four months. Washable activated charcoal filters can be cleaned every two months in hot water or dishwasher at 65°C, then dried in an oven at 100°C for 10 minutes. Replace washable filters every three years or if the mattress becomes damaged.

How do I clean the air inlet and outlet on my Beko induction hob?

After extended use, the air inlet and outlet openings can build up with dust and dirt. Wipe these areas with a soft dry cloth. For dust inside the vents, use a soft brush or mini vacuum cleaner.

How do I check the actual temperature inside my Beko fridge?

Place a thermometer inside a glass of water and leave it on the middle shelf for 12 hours or overnight. This allows the appliance to cool the contents to the right temperature and provides an accurate reading.