Beko Appliance Repair in Bewbush & North Broadfield

What does error code Er 14 mean on a Beko tumble dryer?

Error code Er 14 on a Beko tumble dryer indicates the humidity sensor has exceeded the maximum permitted time. The sensor drying programme has run for too long without detecting dry laundry. Clean the humidity sensors inside the drum. Ensure adequate ventilation. If the problem continues, contact a qualified technician.

What does error code Er 01 mean on a Beko tumble dryer?

Error code Er 01 on a Beko tumble dryer indicates the door was opened during the cycle. Close the door securely and do not open it until the programme has finished. Restart the cycle if needed.

What does error code Er 04 mean on a Beko tumble dryer?

Error code Er 04 on a Beko tumble dryer indicates the door temperature sensor has exceeded 60°C. Allow the dryer to cool down for at least 30 minutes before restarting. Ensure the room has adequate ventilation. If the error recurs frequently, contact a qualified technician for professional diagnosis.

What does error code H6 mean on a Beko dishwasher?

Error code H6 on a Beko dishwasher indicates a water inlet fault. Switch off the dishwasher and unplug it from the mains. The dishwasher is not receiving water correctly. Check the water supply tap is fully open and the inlet hose is not kinked. If the problem persists, contact a qualified technician.

What does error code F5 mean on a Beko oven?

Error code F5 on a Beko oven indicates a door lock mechanism problem. On models with pyrolytic self-cleaning, the door lock is not functioning correctly. Ensure the door is properly closed and latched. Do not attempt to force the door if it is locked. Contact a qualified technician as this fault requires professional diagnosis.

Does my Beko fridge freezer defrost automatically?

Many Beko models feature automatic defrost. All Beko larder fridges defrost automatically, with water running down the drain tube via a collection channel and evaporating in a special container at the back. Frost-free models defrost both fridge and freezer compartments automatically.

How do I clean my Beko induction hob?

Disconnect from the mains and ensure the surface is cool. Wipe with warm water, washing up liquid and a soft cloth or sponge. For tougher stains, use a specific induction hob cleaner suitable for your appliance's surface.

How do I clean the condenser on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. Allow the appliance to cool completely before cleaning. The condenser is located at the bottom left of the appliance. Remove it, then clean by applying pressurised water with a shower head or under a tap until the water runs clear and drains freely. Reinstall and secure the two locks, ensuring the red clips are turned to the lock position.

How do I reset my Beko dishwasher?

To reset your dishwasher, press and hold the start or on/off button for 3-5 seconds until the display clears or the lights reset. If this does not work, switch off the appliance at the mains, wait 2-3 minutes, then switch it back on. This clears most temporary errors and allows you to select a new programme.

How does the pyrolytic self-cleaning function work on my Beko oven?

The pyrolytic function heats your oven up to 480°C, turning grease and food residue to ash. The oven door automatically locks during the process for safety and won't unlock until the oven has cooled to a safe temperature.