Beko Appliance Repair in Langley Green & Tushmore

What does error code E8 mean on a Beko fridge freezer?

Error code E8 on a Beko fridge freezer indicates an ice maker sensor failure. Switch off the appliance and unplug it from the mains. On models with an ice maker, the temperature sensor for the ice maker is not functioning correctly. The ice maker may stop producing ice. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E5 mean on a Beko washing machine?

Error code E5 on a Beko washing machine indicates a drainage problem. Switch off the machine and unplug it from the mains. Clean the pump filter located at the bottom front of the machine. Check the drain hose is not kinked or blocked. Ensure the drain hose is positioned correctly. If the problem persists, contact a qualified technician.

What does error code E1 mean on a Beko washing machine?

Error code E1 on a Beko washing machine indicates a thermistor (NTC temperature sensor) fault. Switch off the machine and unplug it from the mains. Wait a few minutes, then restart. If the error persists, contact a qualified technician as this fault requires professional diagnosis.

What does error code E3 mean on a Beko washing machine?

Error code E3 on a Beko washing machine means the heater is not switching off, indicating a control board relay fault. Switch off the machine immediately and unplug it from the mains. Do not use the machine again until it has been professionally repaired. Contact a qualified technician as this fault requires professional repair.

What does error code E9 mean on a Beko washing machine?

Error code E9 on a Beko washing machine indicates a door lock problem. Switch off the machine and unplug it from the mains. Ensure the door is fully closed and nothing is obstructing the door seal. If the door appears jammed or the lock is not engaging, contact a qualified technician.

How do I use the pyrolytic self-cleaning function on my Beko oven?

First remove all oven accessories such as trays and side racks. Clean the control panel and any removable parts manually. Then start the pyrolytic programme following your manual's instructions. Once complete and cooled, wipe away the ash residue with a damp cloth and water and vinegar solution.

How does the pyrolytic self-cleaning function work on my Beko oven?

The pyrolytic function heats your oven up to 480°C, turning grease and food residue to ash. The oven door automatically locks during the process for safety and won't unlock until the oven has cooled to a safe temperature.

How do I use the delay start function on my Beko washing machine?

Load your laundry and add detergent as normal. Select your desired wash programme, then press the delay button to set how many hours until the cycle begins. Most Beko washing machines allow delays of up to 24 hours. Press start to confirm. The display will show the countdown until the programme begins.

How do I clean the lint filter on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. Ensure the dryer is completely cool before cleaning. Open the door, remove the filter from the front of the drum, and clean off lint. If there is significant buildup, wash both parts of the filter under running water in the reverse direction of the lint buildup. Ensure the filter is completely dry before replacing.

What water pressure does my Beko washing machine need?

Your washing machine requires at least one litre of water in seven seconds. To test, turn on the cold tap nearest to where your machine is installed and measure the flow rate.