LG Appliance Repair in Southgate

What does error PE mean on an LG washing machine?

Error PE on an LG washing machine indicates the water level pressure sensor has malfunctioned. Close the water tap, unplug the machine, wait several minutes, and restart. If the error persists, contact a specialist technician.

What does error dE mean on an LG washing machine?

Error dE on an LG washing machine indicates a door problem. Ensure the door is fully closed with no clothing caught in the seal. Check the door latch engages properly. If the error persists, contact a specialist technician.

What does error UE mean on an LG washing machine?

Error UE on an LG washing machine indicates an unbalanced load during spinning. Open the door and redistribute the laundry evenly. For single heavy items, add additional towels to balance the load. Restart the cycle.

What does error PF mean on an LG tumble dryer?

Error PF on an LG tumble dryer indicates a power failure occurred during a cycle. Allow the dryer to cool for at least 30 minutes. Press Start/Pause to resume the interrupted cycle. If the error appears repeatedly without power interruptions, contact a specialist technician.

What does Cd mean on an LG washer dryer combo?

Cd on an LG washer dryer combo is not an error but indicates the Cool Down phase after a drying cycle. The machine tumbles periodically to prevent wrinkles. Press any button to end the cool down phase. The door can be opened approximately 2 minutes after pressing the button.

Why is my LG microwave turntable not spinning?

Switch off and unplug the microwave before checking. Remove the glass turntable and roller ring, then clean any food debris from the base of the cavity. Check that the roller ring rotates freely and the turntable sits correctly on the drive coupling in the centre. Ensure food containers are not too large for the cavity, as they may obstruct rotation. If the turntable still does not rotate after cleaning and repositioning, contact a qualified technician as the motor may require attention.

Why is my LG fridge ice maker not working?

First, ensure the ice maker is switched on and the water supply is connected and turned on. Check that the freezer temperature is set to at least -18°C or colder. Allow 24 hours after installation for ice production to begin. If the ice maker arm is stuck in the raised position, gently lower it. Clear any ice blockages in the dispenser chute. Replace the water filter if it has not been changed in over six months.

How do I use rinse aid in my LG dishwasher?

Rinse aid improves drying performance and prevents water spots on glassware. Locate the rinse aid dispenser on the inside of the door, lift the flap and fill to the maximum line without overfilling. Close the lid until it clicks. The dispenser releases rinse aid automatically during the final rinse. Adjust the dispensing level if needed: higher levels improve drying in hard water areas, lower levels are suitable for soft water. Refill when the rinse aid indicator illuminates.

Is it normal for my LG refrigerator to make noise?

Some sounds are normal during operation. A humming or buzzing indicates the compressor running. Clicking sounds occur when the defrost cycle starts or stops. Gurgling or bubbling is refrigerant flowing through the system. Rattling may indicate items on top of the fridge or the appliance touching a wall. A new refrigerator may be louder for the first 8-12 hours as it reaches operating temperature. Contact a qualified technician if you hear grinding, knocking or unusually loud noises.

What is AI DD technology on LG washing machines?

AI DD (Artificial Intelligence Direct Drive) uses sensors to detect the weight and softness of fabrics, then automatically selects the optimal wash motions from six available drum movements. This provides better fabric care than standard machines, reducing fabric damage while improving cleaning performance. The technology learns from washing patterns to deliver customised care for different fabric types.