LG Appliance Repair in Northgate & West Green

What does error AE mean on an LG washing machine?

Error AE on an LG washing machine indicates water leakage has been detected. Close the water tap and unplug the machine immediately. Check for visible leaks and contact a specialist technician for internal inspection.

What does error IE mean on an LG dishwasher?

Error IE on an LG dishwasher indicates the machine is not receiving water. Check that the water supply tap is fully open, inspect the inlet hose for kinks, and clean the inlet filter. If the error persists, contact a specialist technician.

What does error Er FS mean on an LG fridge freezer?

Error Er FS on an LG fridge freezer indicates the freezer temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

What does error tE mean on an LG washing machine?

Error tE on an LG washing machine indicates a thermistor (temperature sensor) problem. Unplug the machine and wait several minutes before reconnecting. If the error reappears, contact a specialist technician as the thermistor may need replacing.

What does error Er dS mean on an LG fridge freezer?

Error Er dS on an LG fridge freezer indicates the defrost temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

Why is there frost buildup in my LG freezer?

Frost buildup is usually caused by warm, humid air entering the freezer. Check that the door seal is clean and closing properly with no gaps. Avoid leaving the door open for extended periods. Ensure the freezer is not overfilled, which can block air circulation. If frost persists, unplug the appliance and allow it to defrost for at least eight hours with the doors open. Wipe dry before plugging back in. LG refrigerators with Total No Frost technology should defrost automatically.

What is EasyClean on my LG oven?

EasyClean is a steam cleaning function that softens baked-on residue for easy removal. Add water to the bottom of the oven and run the 10-minute EasyClean cycle. The steam loosens grease and food deposits, which can then be wiped away with a cloth. This method uses less energy than pyrolytic cleaning and is suitable for light to moderate soiling.

What is the Tub Clean cycle and how often should I use it?

The Tub Clean cycle is a drum cleaning function that helps remove detergent residue, bacteria and odours from the washing machine drum. Run it once a month without any laundry in the machine. The cycle heats water to approximately 60°C to sanitise the drum. No detergent is required, though you may use a washing machine cleaner if desired.

Why won't my LG washing machine door open?

The door will not open if water remains in the drum or if the drum is hot. Wait for the machine to cool and drain completely. If the door lock indicator is off but the door remains locked, switch off the machine and unplug it for one to two minutes, then try opening the door. After a power cut, the door may remain locked until the machine is powered on again. Never force the door open as this may damage the locking mechanism.

How often should I clean the filters on my LG dishwasher?

Switch off the dishwasher and allow it to cool if recently used. Clean the filters every one to two weeks, depending on usage frequency. Remove the lower rack, twist and lift out the cylindrical filter, then remove the mesh filter beneath. Rinse under running water and use a soft brush to remove food particles. Reassemble and ensure filters are properly seated to prevent damage to the spray arms.