Whirlpool Appliance Repair in Furnace Green

What does the F01 error mean on a Whirlpool washer dryer?

The F01 error on a Whirlpool washer dryer indicates an electronic circuit board fault. Unplug the appliance from the mains and allow it to cool for at least 30 minutes if it has been drying. Wait for a minimum of 2 minutes after unplugging, then reconnect and wait 30 seconds before trying again. If the fault remains, contact a qualified engineer.

What does the E7 error mean on a Whirlpool fridge freezer?

The E7 error on a Whirlpool fridge freezer indicates an environmental temperature sensor fault. A number of issues affecting the temperature in the appliance could be occurring. Unplug the appliance from the mains before any inspection. Contact a qualified engineer to diagnose and repair the environmental sensor.

What does the F11 error mean on a Whirlpool dishwasher?

The F11 error on a Whirlpool dishwasher indicates a wash pump failure. The pump that circulates water during washing has failed. Do not step on any water that may be in contact with the appliance while it is plugged in. Unplug the appliance from the mains and contact a qualified engineer as the pump may need replacing.

What does the F11 error mean on a Whirlpool washing machine?

The F11 error on a Whirlpool washing machine indicates a pump circuit fault where water remains in the machine and is not pumping out. Turn off the water supply if accessible. Do not step on any water that may be in contact with the appliance while it is plugged in. Unplug the appliance from the mains and contact a qualified engineer for professional pump inspection.

What does the F04 error mean on a Whirlpool dishwasher?

The F04 error on a Whirlpool dishwasher indicates a thermostat fault. The temperature control system is not functioning correctly. Unplug the appliance from the mains before any inspection. Contact a qualified engineer to diagnose and repair the thermostat.

How do I adjust the rinse aid level on my Whirlpool dishwasher?

The rinse aid dispenser has adjustable settings from level 1 to 5. If dishes have water spots, increase the level. If there is excess foam or streaking, decrease the level. The dispenser is located next to the detergent compartment on the door.

Why is my Whirlpool fridge ice maker not making ice?

If your Whirlpool ice maker is not producing ice, check that it is switched on and the water supply is connected. Ensure the freezer temperature is set to -18°C or below. Check that the ice bin is not full, as the ice maker stops when the bin reaches capacity. Allow 24 hours after installation for ice production to begin.

Why is my Whirlpool tumble dryer not heating?

If your tumble dryer runs but produces no heat, first check that Air Only or Refresh mode is not selected. Ensure the lint filter and condenser (if applicable) are clean, as blockages restrict airflow and reduce heating efficiency. For vented dryers, check the external vent is not blocked. If the problem persists, contact a qualified technician.

Why is my Whirlpool induction hob not detecting pans?

Induction hobs require ferromagnetic cookware. Test your pans with a magnet – if it sticks, the pan is compatible. The pan base must be flat and typically at least 12cm diameter, though minimum size may vary by cooking zone. Ensure the pan is centred on the cooking zone.

Why is my Whirlpool washing machine not spinning?

If your Whirlpool washing machine is not spinning, check that the load is balanced and not overloaded. An unbalanced load can prevent the drum from reaching spin speed. Also ensure the door is fully closed and latched, as the machine will not spin with an open door.