Remeha Appliance Repair in Northgate & West Green

What does the error E04.15 mean on a Remeha Quinta Ace boiler?

Error E04.15 on a Remeha Quinta Ace boiler indicates the flue gas pipe is blocked. Visually check that the external flue terminal is not obstructed by debris, ice, or bird nests. Do not attempt to clear internal blockages. Contact a commercial heating engineer to clear any obstructions from the air inlet and flue gas discharge.

What does the error E[01 mean on a Remeha Quinta Pro boiler?

Error E[01 on a Remeha Quinta Pro boiler indicates the safety parameters are incorrect. Check wiring connections and reset the boiler. Contact a commercial heating engineer to reprogram safety parameters or replace the PSU if needed.

What does the error E6 mean on a Remeha boiler?

Error E6 on a Remeha boiler indicates unwanted flame formation when no flame should be present. This typically means the control unit is faulty and requires replacement. Contact a Gas Safe registered engineer for diagnosis and repair.

What does the error E13 mean on a Remeha boiler?

Error E13 on a Remeha boiler indicates the heat exchanger thermal fuse has blown due to catastrophic overheat. This cannot be reset. The heat exchanger is irreparably damaged and requires replacement. Contact a Gas Safe registered engineer as a new boiler may be more economical.

What does the error E04.12 mean on a Remeha Quinta Ace boiler?

Error E04.12 on a Remeha Quinta Ace boiler indicates a false flame was detected before burner start. This is a potentially dangerous condition. Do not attempt any repairs. Contact a commercial heating engineer immediately to check the ionisation electrode and gas valve operation.

How do I bleed radiators connected to my Remeha boiler?

First, open all radiator valves completely and set the room thermostat to its highest setting. Wait until radiators feel warm, then switch off the boiler. Allow approximately 10 minutes for the system to cool. Bleed the lowest radiator first by opening the bleed valve with a radiator key until air escapes, closing when water appears. Work progressively towards the highest radiator.

What are the installation requirements for a Remeha Quinta Ace?

The Remeha Quinta Ace must be installed in a frost-free area with minimum 1 metre by 1 metre clear space in front for standard maintenance. The condensate must be discharged via a tundish directly into a drain using synthetic materials rated for acidic condensate (pH 2 to 5) with minimum 30 mm per metre slope.

How do programmable controls help save energy on a Remeha boiler?

Programmable thermostats like the Remeha iSense allow you to create customised heating schedules based on your daily routine. You can set different temperatures for different times of day, ensuring heating is only active when needed. Clock programs can be adapted to your specific requirements.

How do I adjust the temperature on my Remeha boiler?

For boilers with an iSense thermostat, press the Settings button and navigate to the Temperature section. Use the arrow buttons or turn the push-turn button to increase or decrease the desired temperature. The iSense uses a menu-controlled system with three buttons, making it simple to operate.

How does frost protection work on a Remeha boiler?

Remeha boilers have built-in frost protection. If the boiler water temperature drops below 7°C, the system pump activates automatically to protect the boiler. For room protection via an iSense controller, frost protection activates when the room temperature falls below 6°C. This setting can be adjusted through the controller menu. Note that the built-in frost protection only protects the boiler itself, not the entire heating installation.