Miele Appliance Repair in Northgate & West Green

What does error F82 mean on a Miele coffee machine?

Error F82 on a Miele coffee machine indicates the brew unit requires cleaning. Remove and clean the brew unit weekly under warm running water without washing-up liquid. Also clean the area below the brew unit weekly.

What does error F78 mean on a Miele dishwasher?

Error F78 on a Miele dishwasher indicates the circulation pump may have become dry and stuck, typically after extended periods of non-use. Run a short programme to allow water to flow through and loosen the pump. If it remains stuck, contact a specialist technician.

What does error F34 mean on a Miele washing machine?

Error F34 on a Miele washing machine indicates a door lock fault. The door cannot be locked properly. Ensure nothing is trapped in the door seal and that the door closes fully. Switch off and back on. If the fault persists, contact a specialist technician.

What does error F26 mean on a Miele dishwasher?

Error F26 on a Miele dishwasher indicates the boiling protection has been activated. The water temperature exceeded safe limits. Allow the dishwasher to cool down. If the fault persists after restarting, contact a specialist technician.

What does error F4 mean on a Miele tumble dryer?

Error F4 on a Miele tumble dryer indicates a technical fault that cannot be remedied by the user. Switch off the dryer and disconnect from the mains for a few minutes, then reconnect. If the fault persists, contact a specialist technician.

What is Con@ctivity on my Miele cooker hood?

Con@ctivity enables your cooker hood to communicate automatically with your Miele hob via WiFi. The hood adjusts extraction power in real time based on the number of pots and pans and their temperature settings. When you finish cooking and turn off the hob, the extractor switches off automatically, saving energy and providing convenience.

What should I do if the oven door is dirty after pyrolytic cleaning?

This can occur near the delicate fibreglass seal around the oven compartment. Avoid rubbing or scouring this area. During the pyrolytic cycle, the high temperature removes residues from the inner glass as well as the cavity.

Why are clothes still damp after drying in my Miele washer-dryer?

Check that the moisture sensors inside the drum are clean, as residue or lint build-up can cause premature cycle stops. Clean the fluff filter after every cycle. Ensure the load is not too large for the drying capacity, which is typically smaller than the washing capacity. Select a higher drying level or use the Extra Dry option if available.

What is the Holiday mode on my Miele refrigerator?

Holiday mode reduces energy consumption while you are away by raising the refrigerator temperature to a minimum safe level while keeping the freezer at normal temperature. Empty the refrigerator section before activating this mode. Deactivate Holiday mode when you return and allow the appliance to reach normal temperature before restocking.

Why is a HEPA filter important in my Miele vacuum cleaner?

HEPA filters capture at least 99.97 percent of airborne particles 0.3 microns or larger, including dust mites, mould spores, pet dander, and pollen. This makes them ideal for allergy sufferers and those wanting to improve indoor air quality. Replace the HEPA filter according to the TimeStrip indicator, typically after approximately 50 hours of use or one year.