Immergas Appliance Repair in Furnace Green

What does the 37 error mean on an Immergas boiler?

The 37 error on an Immergas boiler indicates low power supply voltage. The electrical supply to the boiler has dropped below acceptable operating limits. Check that other electrical appliances in your home are working normally. If other appliances are also affected, there may be a general power supply issue in your area. Contact your electricity supplier. If only the boiler is affected, switch off the boiler and contact a qualified electrician to check the electrical supply circuit and connections to the boiler.

What does the 203 error mean on an Immergas heat pump?

The 203 error on an Immergas heat pump indicates a communication error between the inverter and main control board lasting more than six minutes. Switch off the heat pump at the isolator switch for five minutes. Switch back on and monitor for the error. If the error persists, contact a qualified technician. This fault may require inverter board inspection or replacement.

What does the 221 error mean on an Immergas heat pump?

The 221 error on an Immergas heat pump indicates an outdoor unit temperature sensor malfunction. The temperature sensor on the outdoor unit is reporting incorrect readings or has failed. Switch off the heat pump at the isolator switch for five minutes. Switch back on and monitor for the error. If the error persists, contact a qualified technician for sensor testing and replacement.

What does the 06 error mean on an Immergas boiler?

The 06 error on an Immergas boiler indicates a domestic hot water probe anomaly. The NTC temperature sensor measuring hot water temperature is reporting incorrect readings or has failed. The boiler may continue to provide heating but hot water production will be affected. Switch off the boiler at the electrical supply. Wait 30 seconds and switch back on to reset. If the error persists, contact a qualified technician for probe testing and replacement.

What does the 04 error mean on an Immergas boiler?

The 04 error on an Immergas boiler indicates a contacts resistance block, meaning there is a fault detected in the gas valve electrical supply circuit. If you smell gas, do not operate any switches, ventilate the area if safe to do so, leave the property immediately, and call the gas emergency service from outside. If there is no gas smell, switch off the boiler at the electrical supply. Do not attempt to reset. Contact a Gas Safe registered engineer for professional diagnosis and repair of the gas valve circuit.

What do the symbols on my Immergas boiler display mean?

During normal operation, the display shows a green illumination with symbols indicating boiler status. The display typically shows the current water temperature. A flame symbol indicates the burner is active. A tap symbol relates to domestic hot water functions. A radiator symbol relates to central heating. Error codes appear as numbers or letter-number combinations when faults occur. When on standby, a horizontal segment appears. Consult your specific model manual for detailed symbol meanings as they can vary between models.

Does my Immergas heat pump have antifreeze protection?

Yes, Immergas heat pumps include automatic antifreeze protection that activates when outdoor temperatures drop below freezing. This prevents damage to the system and water circuits.

Why are some radiators not heating up when my Immergas boiler is running?

If some radiators remain cold while the boiler is running, trapped air may be the cause. Bleed each cold radiator using a radiator key by opening the bleed valve until water flows steadily, then close it. Ensure all radiator valves are open. Check that the system pressure is between 1.0 and 1.5 bar after bleeding. If radiators remain cold after bleeding, or if multiple radiators are affected, contact a qualified technician as there may be a circulation pump fault or system blockage.

Does my Immergas boiler have a condensate drain that needs attention?

Yes, all Immergas condensing boilers produce condensate that drains away through a dedicated pipe. The condensate drain trap and pipe should be checked as part of annual servicing to ensure they are clear and draining correctly. A blocked condensate drain can cause the boiler to lock out. During very cold weather, external condensate pipes can freeze. If this happens, the boiler will stop working. Contact a qualified technician for assistance as attempting to thaw frozen pipes incorrectly can cause damage.

What annual maintenance does my Immergas boiler require?

Annual maintenance should include cleaning the heat exchanger on the fume side, cleaning the main burner, verifying correct ignition and operation, and checking burner settings for both heating and hot water phases. A visual inspection for leaks and corrosion is also required.